Gezocht naar "carplay". Resultaat 71 tot 80 van 150.

The installation kit KIT-HALO-TRA7S lets you perfectly integrate a 1DIN Alpine Halo system with 9-inch or 11-inch screen (INE-F904D, INE-F904DC, iLX-F115D, iLX-F905D) into a Ford Transit Custom (model year 2018 ->). The kit also enables ±10° horizontal monitor swivel of your Alpine unit.
The KIT-HALO-TRA7S includes a CAN to UART interface featuring support of the steering wheel remote control buttons (latest data protocol including SIRI and OK Google support). It also includes a plug-and-play wiring harness to easily connect your Alpine unit to the Ford vehicle, a camera cable adapter (Alpine direct – RCA), an antenna adapter and a USB adapter. The wiring harness allows for easy access to ignition, speed signal and reversing signal from the CAN bus.
You can even retain the vehicle settings function in the Alpine head unit and includes the convenient “Preflight-Check” function for motorhome drivers.

Note:

• The KIT-HALO-TRA7S is only compatible with vehicles featuring original Ford 1DIN radio (model T15114A) or radio preparation. For Vehicle featuring the original Ford navigation system the original Ford 1-DIN Trim Panel is needed. Please ask your dealer.
• Vehicles with original radio and e-call system: the e-call system remains functional, but in some cases an error message may be displayed (vehicles with radio preparation will not encounter this problem).

This installation kit allows an easy and clean install of the Alpine Halo11 (iLX-F115D), Halo9 (iLX-F905D, iLX-F903D) oder Alpine Halo9 Navi (INE-F904D / INE-F904DC) in a Volkswagen Crafter from model year 2017.

The KIT-F9VW-CRA includes a custom-fit frame and installation brackets (no cable harness or interface).

Depending on the vehicle configuration you will additionally require the following interface:

• for Crafters with radio preparation you need the APF-X300VW
• for Crafters with original radio you need the APF-X310MIB / APF-X320MIB

The optional interfaces allow usage of the steering wheel remote control buttons and retention of the car menu setup through your Alpine system.

The installation kit KIT-F9FI-DU8 lets you perfectly integrate an Alpine Halo system in the Fiat Ducato III Version 8. It is compatible with the Alpine iLX-F115D, iLX-F905D, iLX-F903D,  INE-F904D and INE-F904DC Halo systems.

It includes all metal brackets and screws, a plug-and-play wiring harness and a steering wheel remote control interface for perfect installation, as well as a plastic trim plate for a clean integration in your dashboard and a 1DIN plastic pocket, that can be further upgraded with the KCE-3Qi wireless phone charger (sold separately). If your Ducato is already equipped with an original Qi phone charger, you can continue to use it with your Alpine system. This requires the separately sold KWE-QI-DU8 adapter.

This KIT also supports all buttons of the Ducato’s steering wheel controls, including the telephone (accept / decline) keys.

You can also fully customize and use Alpine’s new “Pre-Flight Check” on your Halo screen to ensure that your motorhome is fully prepared for the road (gas shut off, windows and doors secured, satellite antenna retracted, etc).

The included CAN-Bus interface offers several user adjustments, so you can set for example if your Halo already turns on when you open the driver’s door, set a reversing camera delay and others.

Note:

• the KIT-F9FI-DU8 is only compatible with vehicles featuring radio preparation or open dash (no radio equipped).

This installation kit allows an easy and clean install of the iLX-F905D / iLX-F115D / INE-F904D in a Ford Transit Custom from model year 2018 with original radio or radio preparation.

The KIT-F9FO-TRA includes a custom-fit frame, installation brackets, wiring harness with CAN interface and an antenna adapter. The CAN interface retains usage of the steering wheel remote control buttons. Also it includes an adapter that connects the original USB port in the dashboard with your Alpine system to maintain these useful connectors.

This installation kit allows an easy and clean install of the Alpine Halo11 (iLX-F115D), Halo9 (iLX-F905D, iLX-F903D) or Alpine Halo9 Navi (INE-F904D / INE-F904DC) in a Mercedes Sprinter 907 (VS 30) from model year 2018.

The KIT-F9MB-S907 includes a custom-fit frame, wiring harness with CAN interface and an antenna adapter.

This Kit is compatible for Sprinters with 1 DIN Radio (E1D), vehicles with Radio Preparation (ER0) need additionally the adapter KWE-S907.

This useful USB / AUX terminal is mainly used with the Alpine Style system for FIAT Ducato , but can also be used for other vehicles as custom installation. The terminal is placed instead of the original cigarette lighter socket in the dashboard and offers easy access for USB sticks and mobile devices using a 3.5mm jack. You can also plug in any mobile USB device for charging. Cable length 0.9m.

Enables connection of up to three Alpine direct connetion cameras.

Alpine front, rear and side cameras can be controlled from the head unit screen.

Simply select camera view from receiver's touchscreen.

Works with our latest Alpine head units featuring Direct Camera Input.

This Adapter is needed to install the iLX-F115D / iLX-F905D / iLX-705D / i905D-F into a vehicle with an original GNSS (global navigation satellite system) antenna with FAKRA plug.

• GNSS antenna adapter (30 cm)
• Reuse of original GNSS antenna (if present) on the iLX-F115D / iLX-F905D / iLX-705D / i905D-F
• Antenna adapter Fakra (m) to GT21 (f)
• For vehicles with factory installed or retrofitted navigation antenna

Bring exciting bass to your vehicle with the SWC-W84S907 Subwoofer designed for Mercedes Sprinter 907 / 910.

The 180 Watt subwoofer comes pre-installed in a sealed, custom-fit wooden enclosure for installation under the passenger seat to add powerful bass to your existing sound system.

Note: a separate amplifier is required to power this subwoofer

Bring exciting bass to your vehicle with the SWC-D84T6 Subwoofer designed for Volkswagen T6.1 or T6.

The 180 Watt subwoofer come pre-installed in a custom-fit wooden enclosure for installation under the passenger seat to add powerful bass to your existing sound system and is even compatible with the rotary seat of the California camping bus.

Note: a separate amplifier is required to power this subwoofer